“A good case to put together especially if you want to re-case your Pi after already installing heatsinks. Some of the other metal cases act as heatsinks so would have not gone on for my setup. Also leaves space for a fan inside and lets air in nicely! This was a good solution for me. Some say the SD cards are difficult to remove and it is a little awkward however when putting this case together I did become aware some may have put the side part on backward which would make removing SD cards even more difficult! So just make sure you install that side correctly and it’s not so bad.”
“Either the port cut-outs in the case were out of specification by a fraction of a millimetre, or my Raspberry Pi 4B was. I had to apply my Dremel to the cut outs to allow the ports to fit into the slots and the Pi to pivot round so that it could be screwed to the single mounting post and the case was fit to go. Otherwise, PiHut delivery and service was as excellent as usual.”
“You can't easily see the LEDs and getting the SD card in and out is tricky. The one thing you don't want is to let the card drop in the gap as then you might have to take the case apart to retrieve the card. If you are lucky you might be able to shake it out.”
“I don't have anything bad to say about this company. They deliver what you order, unlike some other companies!
Now, 21/12/2021, I strongly recommend them and they are reliable!!! I hope they will keep up this good work!”
“Very smart & solid, without being 'chunky'. Not quite perfect - a set of rubber feet would help - but it's exactly what I expected and have zero issues with it.”
