XL Raspberry Pi 4 Heatsink Black Reviews

4.6 Rating 101 Reviews

Visit Product Page

Email:

contact@thepihut.com

Location:

Mann Enterprises LTDHomefield RoadHaverhill, SuffolkCB9 8QP
Cambridge
CB9 8QP

Visit Product Page

“Super product”

Helpful Report

Posted 5 years ago

“By itself only OK, but it more importantly provides the facility to fit a decent fan which really is very effective at keeping the temperature down (in my case”

Helpful Report

Posted 5 years ago

“Was actually fitted while the pi was still running. Not sure if it made any difference as I’m not advanced enough with how Raspbian work to see of there was any throttling or not.”

Helpful Report

Posted 5 years ago

“Just take care not to peel off the double sided tape”

Helpful Report

Posted 5 years ago

“Great device - does everything claimed of it - but: wi-fi sensitivity (hence broadband speed) is much lower than the model 3B+. If it was not for the fact that I now use a wired LAN connection I would have returned the Pi4 as unusable. From online investigation it seems I am not the only one to have had this problem.”

Helpful Report

Posted 5 years ago

“Looks good haven’t fitted it yet”

Helpful Report

Posted 5 years ago

“Although popular wisdom is that bigger is better, this is large enough to be a tight fit and leaves me wondering about quality of contact. The adhesive has the appearance of being double sided tape rather than a thermal tape. As another reviewer has stated it might interfere with the camera and display connectors if these were to be used.”

Helpful Report

Posted 5 years ago

“Bulky block, but comfortable fit on the board. Fits under a fan if you need belt and braces. Keeps the temp to well below 60C (and 30ish with a fan). Thought it might conflict with the GPIO pins, but there is enough room (just). Take care fitting it.”

Helpful Report

Posted 5 years ago