2 Way 250w Door Speaker Upgrade MX5 Mk2/2.5/3/3.5/3.75 Reviews

4.9 Rating 53 Reviews
Read MX5parts Reviews

They're Back! After much investigation, we have finally managed to establish a suitable upgrade for the Mk2/2.5 & Mk3/3.5 door speakers! These are the 2 way JVC upgrades and are the perfect answer to transform the sound qualilty from your stereo. Features -  2-Way Coaxial250W Peak/30W RMS PowerFrequency Response: 35 - 22,000HzSound Pressure Level: 92dB/W.mMica Cone WooferPoly-Ether Imide Balanced TweeterFerrite Magnet (Woofer)Hybrid SurroundThese are suitable for both the Mk2/2.5 and Mk3 & 3.5 models, and will fit into the standard speaker holder using the existing mounting holes. In order to acheive a perfect fit in the Mk2/2.5 however, we suggest two minor adaptions. The first is to remove the two "tags" on the edge of the speaker, and the second is to trim a small piece from the back of the plastic holder in the door. Please see the larger photos for more details. Also, should you wish to return your car to standard at any time, we advise when cutting the factory plug off the existing wiring, cut it a few centimetres back from the plug leaving you enough wiring to rejoin should you need to.When fitting these to a Mk3 or 3.5, please note that on the drivers side speaker, the black/white wire is the positive, and the red/orange wire is negative, then on the passenger side the orange wire is the positive and the green wire is negative.Fits all Mk2, 2.5, Mk3, Mk3.5 & 3.75 models, 1998>2015Please note: These will not fit Mk2/2.5 or Mk3/3.5 models fitted with a Bose system, or Mk2 Euphonic Special Editions with the upgraded Sony Stereo system.

Visit Product Page

Phone:

02392 644588

Email:

sales@mx5parts.co.uk

Location:

1 Orion Court, 5 Rodney Road,,
Portsmouth
PO4 8SZ

Robert Penfold
Verified Reviewer
Excellent quality for the price. It took about an hour to install, which was fairly easy. I would definitely recommend these speakers.
Helpful Report
Posted 1 year ago
Luke Mulholland
Verified Reviewer
Couldn't ask anything more for รบ37. Great quality even at louder volumes. such a great improvement from the stock ones. and great service from mx5 parts
Helpful Report
Posted 1 year ago
Robert Willis
Verified Reviewer
So based on other reviews and YouTube vids I got some spare door panel plastic lugs and a pair of Ford loom connectors (search for Ford Focus & KA & Mondeo Speaker Adaptor Lead Loom Connectors PC2-815 Pair) I watched a bunch of YouTube and then took the plunge. Everything was fine except that I had to put new spade ends on the Ford adapter - was very careful to follow instructions for wire colour +/- orientation. Also, I took the sticky gasket off the oem speakers and put it on these before installation. Sounds great with the Apple CarPlay unit I installed previously!
Helpful Report
Posted 1 year ago
Patrick Doriot
Verified Reviewer
Excellent purchase price. Easy to assemble. The excellent sound. A good product.
Helpful Report
Posted 3 years ago
Steve Palmer
Verified Reviewer
Great speakers for the price. Very quick service and whilst not a plug and play change (due to the speaker terminals) pretty close.A much rounder deeper sound.
Helpful Report
Posted 3 years ago
Leigh Morris
Verified Reviewer
If you are looking to upgrade your speakers ? Do it you wont be disappointed for the money they are excellent. And again a 1st class delivery from MX5 Parts.
Helpful Report
Posted 3 years ago
Peter Herbert
Verified Reviewer
Easy fit, very clear sound with enough bass. In clarity these speakers are an improvement compared to the original speakers. Followed the tip in the review by Stefan Svenberg to connect the speakers. Good value for money!
Helpful Report
Posted 3 years ago
Peter St.Clair-Braude
Verified Reviewer
Good value and they can certainly take increased volume without distortion and a good rich sound. First speaker took 40 minutes and the second about 20. Did not need to trim the speaker holder as it fitted without touching. Also with perseverance it's possible to ease out the metal connectors from the plastic clip so no wire splicing is needed as they clip directly on to the new speakers.
Helpful Report
Posted 4 years ago