“Saved me an insane amount of time sorting out headers, and let me hit the ground running! With the pico's documentation I was able to get the board's led blinking in a few minutes. Now to get going with the project... :)”
“All you need to get up and running. I did have trouble trying to flash it. Once the image was loaded the pico should reboot, but mine never did. I was at the point of thinking it was faulty until I realised I was trying to load the pico 2 image onto a first generation board. The right image fired up right away. A novice error!”
“The breadboard and the cables are poor quality.
The links in the breadboard are not properly aligned with the holes, some were just bent inside, some were completely out of the breadboard, I had to reinsert them manually.
The points of the cables are not solid metal, it's a sheet of metal bent in a round, and the spike is just bent as well. This make the insertion hard sometimes, up to the point where the point would open and the metal sheets would separate when trying to insert in the breadboard.
The Pico H itself works perfectly, the welding of the pins is clean.
The LEDs and resistor work fine
I should have just bought the pico, since I already have a few LED and res.”
“Everything needed for the first time pico beginner. I am rubbish at soldering so this make life easier. A small leaflet to point you in the wright way to start wouldn't go a miss. But delivered quickly and well packaged.”
