“Nice clicky buttons. They are a nice size and feel strong enough. I have used them for prototyping on a breadboard, which they worked well on. There area few little issues with using them on the breadboard, but easily rectified:
- They have a small notch on the bottom which stops you pushing them on far enough to make contact in the board. To get around this I put them over the gap in the middle of my boards.
- If can be quite difficult to push the buttons in far enough to make contact. To avoid damaging the mechanism I used a screwdriver to push down the button on the edge.”
“Nice colourfu; medium sized buttons I wanted for my project, the pins are slightly too large to fit in m breadboard but I just use other bittons for my prototype and use these in my final project.”
“Buttons are fine for my needs but there are a couple of issues: the caps a colourful but the retaining clips are different heights on Red/Blue and Yellow/Green/Grey so it looks odd having different colours next to each other. Also the button rotates in the casing.”
“The buttons are good of a good build quality and easy to press and assemble. However, they easily fall out of a bread board and sometimes come out when you press them.”
