Login
Start Free Trial Are you a business? Click Here

NVMe Case for Raspberry Pi 5 Reviews

4.7 Rating 88 Reviews
Read Pimoroni Ltd Reviews

About Pimoroni Ltd:

The ultimate Maker store — a curated range of the best of breed Maker products. Worldwide delivery. Personal support.

Visit Product Page
Philip Boulain
Verified Reviewer
“Not actually usable with GPIO, which is half the point of a RasPi rather than some other small system. If you have, say, a Breakout Garden, you'll want to attach it with a ribbon cable, and the case *does* have a slot the right size to allow this. But you'll find that the ribbon cable and the spacers that attach the case on that side are fighting for the same space. (The ribbon cable *also* fights with the official heatsink; RapPi have just increasingly intruded on the space around the GPIO header unfortunately.) If you're doing ad-hoc jumper wires from specific GPIO pins, you could get away from it, but if you want to send a HAT or such outside the case you're out of luck. I'm at a loss as to how they didn't test this. Mine's running with those two spacers omitted, and my GPIO cable ground down to as little extra plastic as possible, only held together on one side as a result. A better fix would be to not hold the case lid on by bolting all the way through the board since there really isn't clearance for anything much more than a bolt head at board level. Note also that the SD card becomes *really* hard to access, although most of that is actually the fault of the ribbon cable for the NVMe base, which is *incredibly* fiddly to attach in this setup since you can't do at 90 degrees first; you must to it in-place since you need to wriggle the USB sockets into their holes first if you're following Pimoroni's instructions.”
Helpful Report
Posted 1 year ago
Ahoy! Sorry to hear you didn't like the case - if you'd like to return it so you can buy one that allows easier access to the SD card/GPIO please drop us an email at support@pimoroni.com and we can send you our returns details.
Posted 1 year ago
Deepankar Datta
Verified Reviewer
“Good case if you're getting the NVMe Base Duo. Not really much to say about this.”
Helpful Report
Posted 1 year ago
“Everything fits and works very well.”
Helpful Report
Posted 1 year ago
John Winters
Verified Reviewer
“Seems a good case and I suspect it might even improve the cooling overall as it will act as a heat sink itself. One crucial item missing from the assembly instructions - put your uSD card (if any) in the RPi *before* you connect the ribbon cable. It's hard enough to get the ribbon cable in at all, really annoying to have to do it twice.”
Helpful Report
Posted 1 year ago
Trevor Sparks
Verified Reviewer
“What to say? It's solid, easy to use (the ribbon a tiny bit tricky to reinsert...), looks the part and cost the same as a couple of coffees and a dougnut.”
Helpful Report
Posted 1 year ago
Jacob Gjedde
Verified Reviewer
“Fits my Raspberry Pi 5 with a pimoroni NVMe base and active cooler just perfectly.”
Helpful Report
Posted 1 year ago
“Easy to put together and protects the PI and SSD. Fast delivery to the US.”
Helpful Report
Posted 1 year ago
Hugo Portier
Verified Reviewer
“Parfait !”
Helpful Report
Posted 1 year ago