Login
Start Free Trial Are you a business? Click Here

3.5" Capacitive Touch IPS LCD Display (320 x 480) Reviews

4.6 Rating 7 Reviews
Read The Pi Hut Reviews
Visit Product Page

Email:

contact@thepihut.com

Richard S
Verified Reviewer
Incentivized
“Although a lot of wiring compared to my last LCD from waveshare, managed to get this up and running with the test script. Now all I have to do is make a holder to keep it safe”
Helpful Report
Posted 1 month ago
“If you're a novice like me this may save you a bit of time. This is the Waveshare model with setup guide: https://www.waveshare.com/wiki/3.5inch_Capacitive_Touch_LCD Setting up on Pi 3B, only issue I had was missing smbus library. Resolved with: sudo apt update sudo apt install -y python3-smbus i2c-tools”
1 Helpful Report
Posted 9 months ago
Anonymous
Verified Reviewer
Incentivized
“Works exactly as described. Arduino libraries can be a bit of a challenge but the ones I found to work easiest and best are RAK14014_FT6336U for the touchscreen (remember to reduce the pointless "delay(10)" in the library to "Delay(2)" - turns the touchscreen from slow to fast. No need to bother with interrupts. To debounce and eliminate the odd random zero just read it twice and only accept 2 consecutive values within 5 pixels as a single tap. For the display itself I used the excellent u8g2 and "arduino_GFX_Library".”
1 Helpful Report
Posted 11 months ago
“This display was not going to give in without a fight. With no useful examples of use with STM32 devices found it was hard work, but having done this, and using DMA to full advantage, this display driven by STM32 is impressive and fast. Touch screen controller FT3663 - data sheet does not reveal I2C address! (its 0x70), and includes 'pressure' and 'area' outputs which do not work. Poor data all round, good display.”
Helpful Report
Posted 1 year ago
“Neat display with a more professional front than the normal plain LCD screen. Planning to use it on a small STM32 based project I've planned so trusting the display quality will be as good as other ST7796 based displays I've tried in the past.”
Helpful Report
Posted 1 year ago
“Top screen - but trying to get it working with Pico 2 takes some work. GPT helps provide some simple drivers and would be nice if Waveshare produce a comprehensive chip driver for the display and touch for Micropython. It can be slow without a large Framebuffer on a Pico but it does work - next is to get a third party gui library working. Challenging but interesting.”
Helpful Report
Posted 1 year ago
“The hardware is fine, but it is almost completely lacking in documentation and software support.”
2 Helpful Report
Posted 1 year ago