“Good fillament from a local manufacturer. I'm using it to block LEDs selectively, while selective gaps in the part let it shine out. I bought Galaxy black from an offshore vendor and it let the light through ruining this effect. This black doesn't and works well.
Consider printing the spool edge protectors for the cardboard spool if you will be taking it on and off the printer often.”
“The filament itself is good quality and prints very nicely on our Prusa Mini+. Unfortunately the corrugated cardboard becomes floppy and worn very quickly. I have had two five-hour prints ruined because the filament became jammed between the floppy sides and the coil. This product is not designed to be handled too often and is therefore probably not suitable for most hobbyists.”
“I’ve bought a LOT of PLA from multiple sources but this seems to be the one to use for future jobs!
Clean prints at 210c, 50c plate, 75mm/s, 10% gyroid for some functional prints as part of ‘something’ I’m building.
Very few strings if any and I’ve yet to have any extrusion issues.”
