“WHAT THEY DONT TELL YOU - AND SHOULD, ON THE PACKAGING.... DO NOT TOUCH THE SENSOR. KEEP SOLDER FLUX AND SMOKE AWAY FROM THE SENSOR! I have experienced a significant issue with the humidity reading. Compared with a DHT11 and local weather observations, the BME680 initially reported humidity considerably lower than expected — around 34–36% when the other readings were around 60–70%. This was after the "burn in" period. There are other suggestions in various forums to calibrate - (salt saturation test) - Overall, it is a very capable sensor, but I would recommend allowing it plenty of time to stabilise and paying particular attention to handling and soldering when using it for accurate humidity measurements.”
“Good delivery (EVRI works will in my area) The unit works as expected with no issues just connected to a Nano board with AI generated code to the arduino IDE. Comes with a few headers to be soldered on if needed.”
“Works fine with raspberry pi but have had multiple spurious temperature results where it stuck at 35 C. Cannot for the life of me get it to work on arduino IDE with ESP32 board.”
“I bought this product thinking it would work on the Raspberry Pi Pico but to my demise, the library was not readily compatible out of the box. Just as a note, it works with the Raspberry Pi Pico (in the end, this is an I2C device and it can be read as long as a compatible device like the Pico can read and write I2C commands, meaning anything is possible). I had to make few modifications to the library to make it work but this is very good and handy!”
“Nice little sensor usable in many applications. Perfect for DIY weather-stations, monitoring rooms etc. Instructions are pretty straight-forward even for beginners.”