“I'm not sure I would have paid the original full price for one, but I'm very pleased with these. I'm just using them as larger cases for Pi 3B and 4B, so far, with room to add things later. The 4B does fit reasonably well if you put the front panel in backwards - you just have to reach cables through the side holes to get to the USB C, two tiny HDMI and the 3,5mm audio socket - not really a big problem.
The standoffs included are M2.5, and are maybe 5 or 6mm short of reaching the bottom of the case, without a relay board in, so I'm using four M2.5 bolts (10 or 12mm long) as adjustable feet. I've ordered some more M2.5 hex posts / standoffs, to do the job more tidily, but the bolts work well enough.
I've been using a Pi 3B in the standard Pi case that they used to come with but I find the weight of the cables plugged into it tend to drag it off onto the floor quite easily. These bigger cases give it more heft and make it stay put better, plus there's more air inside them so cooling isn't as much of a problem as it is with a tight fitting plastic case. I've mounted the Pis on the short standoffs that are included, so there's air between the bottom of their PCBs and the shelf layer, then the longer standoffs go under that.
Getting to the micro SD card is tricky, but not impossible. I think it will be slightly easier when I put longer standoffs between the PCB and the shelf part.”
“All is good, but you need to modify the instructions for when it's time to connect the ribbon cable, and also you need to mention : "you should connect all 4 external relay wires to the board BEFORE closing the casing". And also, the micro SD card doesn't have a slot, so you have to unscrew the cover to be able to access the card.
Otherwise, pretty interesting design ... Cheers”
“Great idea, but a bit weird implementation - once you assemble the case, you cannot access the screws on the relay board. You can't even partially assemble the case - the middle plate blocks the relay board off.
So, if you're planning to install your Pi in a place with difficult access, you'll have to assemble the case in that place.”