“Excellent break out board using the old 6050 imu. It has 8kHz sample rate for the gyroscope, which is great for my application (instrumenting sports equipment). I only need 2kHz on 2 axes, so I can use the I2C bus, which is super easy using the smbus library. Packaging is much better than generic Amazon boards with QWIIK connector to get you going, and 4 mounting holes (good for my application when the board will be regularly experiencing 12 to 14g). I would hope that the generic 6050 from Adafruit is higher quality than the very cheap generic boards (I believe the original chip is no longer made by TDK).”
“I had lots of success with the accelerometer, creating a device to control a pan-tilt mount for a pi camera depending on its orientation. The gyro was less successful, giving readings of constant rotation even when stationery. Needing some fiddling to get satisfactory output.”
“Only tried these with the i2C interface, but we're getting a 160Hz sample rate with 2 of them hooked up in series with two 9DOF - it appears as if you can only have two of the same type at once, but that's only what the jumper settings indicate - accuracy currently within a half a degree, but that's improving as we improve the config”