“The Sensirion SHT31-D I purchased will be used in an Arduino powered DSLR camera trap oddly enough as it's fitted with a LoRa transmitter to tell me if there's any activity where it's set up. This is a dead carrier transmission so I thought it might make things a little more interesting to send temp and RH at the same time along with a periodic one to tell me all is well. Before I could add it to the camera trap my better half pointed out that her weather station had died so I was asked to make a replacement. The attached image is temperature and humidity (which isn't used here) from the SHT31-D whilst it was being tested and isobaric pressure from a BME280. The humidity readings whilst not used at the moment appear to be more accurate in the SHT31-D than from any of the other humidity sensors I've tried, comparisons being made by visiting the plethora of weather watch websites covering where I live. Thanks are due to Pi Hut for their always excellent service and as a temperatute and humidity sensor there's not really anything to fault the SHT31-D especially now I've got it back from the wife.”
“This sensor has worked well in my Raspberry Pi home made weather system after having problems with the more expensive BME280 (which got stuck on 100% after some high humidity). A new HTU-21D sensor has also been working well.”