Login
Start Free Trial Are you a business? Click Here

Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V Reviews

5 Rating 7 Reviews
Read The Pi Hut Reviews
Visit Product Page

Email:

contact@thepihut.com

“Works better if the input voltage is above 6v otherwise great little board”
Helpful Report
Posted 2 years ago
“extremely precise, just what I need to accurately measure voltages through my microcontroller”
Helpful Report
Posted 3 years ago
“Haven’t had time yet to check out the LM4040, but it arrived quickly, was well packed & included an unexpected set of header pins which was a nice touch. Good price too - so another 5 star transaction with Pi Hut!”
Helpful Report
Posted 4 years ago
“Very accurate little board. Great price and fast delivery”
Helpful Report
Posted 4 years ago
“Arrived very quickly and works well.”
Helpful Report
Posted 4 years ago
“It works perfectly”
Helpful Report
Posted 6 years ago
“The LM4040 is just what I was looking for to build an affordable reference standard to test the accuracy of the 5 or so digital multimeters I have accumulated over the years. To protect it and make it more versatile I put it into a little box with two banana jacks to provide an input of 6 to 9V. The LM4040 2.048V output feeds through a jumper a divider made of 2 x 1K resistors and similar the 4.096V output feeds a divider made of a 10K and 1K resistor (all resistors are 0.1%). This gives me two additional reference voltages of 1.024V and 0.372V. The 1.024 tap is very handy for multimeters that only go to 1.999, the other tap tests the millivolt range if the meter has one. Taking the jumpers out stops the LM4040 feeding the dividers and allows me to access the resistors directly to test the ohms ranges 1K, 2K, 3K, 10K, 11K, 12K and 13K. Connecting the multimeter in amp mode between the terminals for the (removed) 2.048V jumper allows me to check if the meter reads 1.024 mA (2.048V/2000 Ohms). For this check, you need to consider the internal resistance of the multimeter in mA or uA mode which can be significant. For example, most of my meters have”
Helpful Report
Posted 9 years ago