“Seems like an excellent case and a solid design. Having to knock off one star because only one type of standoff/spacer was provided (the stainless steel 20mm ones), and based on the assembly manual, there should also be 18mm brass spacers. The 18mm ones have not been provided and I'm not confident that the Pi HAT+ will fit on top nicely without stressing the ribbon cable. This is inconvenient as the official standoffs that come with the Pi M.2 HAT+ cannot be used due to the case design which requires a long thread on one end.
Otherwise, happy with the quality and design. It's just a shame that 8 of that the 20mm spacers were provided instead of 4x 18mm and 4x 20mm as I can't continue with my setup today.”
“Its metal and was easy to install my Pi5 so it feels like it's protected.
I'm using it with a combined PoE and NVME hat without issue and it all fits well together.”
“Well made and easy to disassemble and reassemble when installing the Raspberry Pi 5 board. The case came with everything I needed and the SSD hat I installed fit perfectly as well.”
“My pi fitted into the case, with all the ports aligning perfectly.
Not a criticism that warrants a reduction in my score... far too many screws... over engineered for my needs!”
