“The case is very well made with no burrs or sharp edges, all the cutouts are perfect with no marks in the black textured finish. The case was disassembled and reasembled very easily, with black matching screws. The fit of the internal compononts consisting of an RPI5 and iQAUDIO dac was perfect with no alignment issues. The case is well ventilated and came supplied with four black rubber stick on feet, which is a nice touch as I would have bought these. Overall I am very happy with my KKSB case and it takes pride of place on my HiFi stand.”
“Good solid build. The top was held on rather tightly, so a good small screwdriver is required to open it up to receive the Pi! Two of the four spacers to hold up the DAC card are very close to the end wall, so small fingers (or pliers in my case) required to screw them in place. The gpio pin extender (so they reach up to the DAC level) was a very tight fit. Worrying at set up time, but presumably a good thing in the long run! Once up and running, this is a good case.”
“Excellent case for Rpi5 and DAC Pro. Really professional finish. Good ventilation. Using this as a music endpoint with only passive cooling. Works great.”
“I just bought this case along with a new pi 5 16 gb and pi dac pro soundcard.
It sounds phenomenal! It sounds so rich and warm, and the case houses it all beautifully.
The power button is the best one I've had yet and the sd card slot is well tailored for.
So many cases leave a gap and I've found myself shaking my Pi to get an sd card out of a case, but this one has a nice entrance which you use to aid guiding the sd card into the slot nicely, and you can get it back out WITHOUT having to use a pair of tweezers.
Perfect in every way. 10/.10”
