“Would have been useful if the pads which run outward from the Pico were connected together like a breadboard. The only pads connected together are from the Pico headers to the hole within the white box, meaning you'll have to just use lots of wire to connect things together, which isn't the idea of a PCB.”
“A useful board. I used two socket strips with long pins so that I could plug the Pi Pico into one side and the Waveshare 1.8" display onto the other. A second row of pins down either side can then be used for connecting other devices to the unused pins.”
“Excellent service, arrived within 48hrs of order. Well packed. Board is well designed and made. It breaks out the pins to separate holes at side of pico, well thought out and very useable.”
“Only one through hole for each Pico pin is linked to the Pico. All the other through holes are independent (no links) / isolated. Through holes are sized to take Pico pin size. The jumper cable male pins are far smaller and would take a mass of solder to hold each one in if this method was employed. The sizing of holes better accommodates 7/0.2mm hook-up wire.”