“The cable seems well made. But be aware that if it is allowed to hang loosely, pins can touch each other. The +5V pins in particular should be kept away from others.
Whereas the connector on the cable has an ident to ensure its orientation, there is no corresponding skirt on pi boards. On the pi 4 at least, the pin numbering is correct when the cable is led across the PCB, rather than leading away from it. Usefully, the numbered labels are large enough to write your own symbols on the blank side.”
“This is a good idea however It has been numbered wrong. If the wires are not to ly across the computer then you will require to reverse the numbering of the wires For example number 40 will be GPIO 1 and 39 will be GPIO 2 etc. This can be done but not convenient.”