Type of product: Heater assembly Make and Model: Chinese LX Whirlpool Bath. H30-R1 Power: Volts: 230 Hz: 50 KW: 3.0 Amps: 13.6 Specification Sensor compatibility: Controlled by the system control box Material spec: Required flow rate: Set by pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not work Flow detection: Pressure switch built in to the heater run on a separate cord Compatible with: Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project Connections / Fixings: 2" white plastic female sockets to connect to plumbing Dimensions: Heater length: Heater Diameter: approx. 63 mm Overall height:? 20mm Overall length complete: 340mm Additional notes: Compatible with most of the Chinese Hot Tubs with a slight change of plumbing or can be used on a bespoke project. High limit thermal cut out built into. This unit is rated IPX5 and has CE approval.
Visit Product PagePhone:
01348840509
Location:
Hayscastle
Haverfordwest
SA62 5QG
