Seajet 117 Multipurpose Epoxy Primer Grey 1 Litre Reviews

4 Rating 1 Reviews

A high performance, multipurpose, two component epoxy primer suitable for both above and below waterline areas. It is recommended for use under antifouling and two-component topcoats, where it will give long term durability. Ideal for use on GRP hulls where up to four coats can be applied for an osmosis preventative system, as well as metal keels and the like. Suitable for: Fibreglass, Wood, Aluminium (after abrading), Steel, Cast Iron & Lead Colour: Grey Coverage: 8.5sq.m/ltr Drying Time @ 5deg.C: Touch dry 3hrs, Hard dry 32hrs Drying Time @ 10deg.C: Touch dry 2hrs, Hard dry 24hrs Sizes: 1Ltr and 2.5Ltr Download Product Datasheet here.

Visit Product Page

How would you rate the quality of this product?

How would you rate the description of the product?

Would you recommend this product to a fellow boater? Yes

What activity do you use this for? Motor/Power Boat

Location Isle of Iona

“Easy enough to mix. I guessed at what I needed and made a batch each time I wanted to apply a coat. The small amount left over had set solid by the following morning, so it’s definitely worth doing this. I applied the first coat with a brush - which was a big mistake. It’s horrible to work with, even when thinned by 5%. It goes off so quickly that the third or fourth brush stroke leaves it claggy. It is MUCH better applied with a roller. I learned the hard way. I’ve applied four coats to the bottom of my aluminium boat and, at present, it appears to have bonded well and formed a solid foundation for future antifouling.”

Helpful Report

Posted 3 months ago