A unique, water based antifouling formulated specifically for the coating of fishfinder and echosounder transducers. It is solvent free so it won’t damage the transducer thus meeting the guidelines of the major transducer manufacturers. Particularly useful for use on plastic transducers, where some antifoul solvents can cause damage. Eco Transducer Antifouling Key Features Doesn’t reduce the transducer signal Easy to apply by brush & quick drying No primer required Outstanding adhesion on any surface Colour: Black Size: 70ml (normally sufficient for 2-3 transducers) Thinners: Water ECO user guide & Recommendations: Mix very well before application Do not use with temperature below 5° C or above 38° C Surface Preparation: Sand with fine sandpaper (n.220min.) or with abrasive pads (like Scotch Brite) Application: Apply one coat of Echo - Wait at least 1 hour (at 20° C) Apply a second coat of Echo - Wait at least 6 hours at 20° C before launching Safety: Harmful by inhalation Irritating to eyes May cause sensitisation by skin contact Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment Keep out of reach of children Do not breathe vapour Avoid contact with skin Do not empty into drains Wear suitable gloves If swallowed, seek medical advice immediately and show this container or label Use only in well-ventilated areas Avoid release to the environment.
Visit Product Page
