Flag Cruising Antifoul 2.5L is a copper based, self-eroding antifouling suitable for craft capable of speeds upto around 8 knots. It offers excellent value and good allround fouling prevention. It has proven performance within a wide variety of UK conditions & many European locations. Use on GRP, wood, steel & ferro-cement (over a suitable primer). The eroding design is proven to create less 'build up' than many traditional or hard antifoulings. Flag Cruising antifoul can be applied over the top of most single component antifouls with minimal preparation (normall just a very light sand and wash with fresh water). If you are starting from a bare hull, or you don't know what sort of antifoul is currently in place, apply a coat of Flag Multipurpose Primer (M400840) to start with. Key Features Thinners/Tool Cleaner: Use Thinners No.3 (See P/No 400838) Coverage: 10 sq.m/ltr (Download the Flag Antifoul coverage chart here) Colours: Black, Dark Blue, Light Blue, Red, Off White Primer: For use on most substrates, including fibreglass, Flag Multipurpose Primer is a good choice Can be applied with either a roller or brush. When starting with an uncoated surface, apply 2 coats for a full season of protection. Manufacturers data sheet details: This product is self-priming when applying over existing (similar copper based) antifoulings; otherwise FLAG Multi-Purpose Metallic Primer is required. Suitable for general sailing and displacement craft with speeds up to around 8 knots Also suitable for fresh water Area of use: Boat hulls, below the waterline. Substrates: GRP, wood, steel and ferro cement. Not suitable for aluminium or galvanised surfaces Colours available; Black Dark Blue Light Blue Red Steel White More information available on the Flag Cruising Antifoul: Flag Cruising Antifoul Coverage Calculator Flag Cruising Antifoul Product data sheet
Visit Product Page
