Download the spec sheet for the Dual Colour LED Strip Lights (60 x 5050 SMD, 14.4W, 1020 Lumens) here. Coming with sequenced warm white & cool white LEDs, the Mirrorstone 14.4w/m dual colour LED strip light can be used in all domestic installations as well as a wide range of commercial projects. Due to strip lights versatility to be installed in practically every domestic environment, they come with a backing that is self adhesive to amplify this versatility. Due to the wide range of surfaces that the LED Strip Lights are stuck to, we unfortunately cannot guarantee the adhesive on all surfaces. These strips can also be cut to the nearest 100mm so you can get lengths of strip lights cut to lengths that are specific to your installation. Did you know that all of our LED Tape is dimmable? Simply use alongside a dimmable driver to alter the brightness! Our dual colour LED strip lights and the related products are included in our unique discount codes ran on the website from time to time, allowing you to get up to 20% off of our order. Please note that all IP67 and IP68 tape comes in lengths of up to 5m max, and will not fit in any of our aluminium profiles. IP65 tape comes in maximum lengths of up to 25m, and will be soldered tape to tape every 5m for any lengths over 5m. Although 25m lengths are available in this way, there is no guarantee that it can be ran continuously due to power drop. Please get in touch with us if you require further information about this. IP20 tape may or may not come soldered tape to tape, as this depends on how it arrives to us from our suppliers. Find further information on Strip Lights on our FAQs page. Shield Your LED Strips From Water Damage One of the reasons for the aforementioned versatility is due to the IP Ratings available for the strip light. The available IP Ratings and their uses are in the table below: IP Ratings General Installations IP20 Offering no protection from any form of water, you are advised to install IP20 LED strip lights where there is no water access. It has a vast use in almost all internal installations. IP65 Coming with a silicone layer for added protection from water, IP65 LED strip lights are normally installed in bathrooms and external. Get Your Strips Cut Free Of Charge Like previously mentioned, these strips have cutting points every 100mm. As not everyone is able to solder LED strips, Wholesale LED Lights offers a free cutting and soldering service where we can make up the lengths to your specification. This service is only available for strip lights purchased at Wholesale LED Lights. Despite only using three cores on the LED strip we can still extend cable on the end with the 4 core LED cable. All LED Tape is priced per metre. If you purchase any amount of LED strip lights then we will send it out as one full, uninterrupted length e.g. 1 x 3m rather than 3 x 1m. Illuminating The LED Strip Lights And Variable Colour Temperatures Being low voltage, you will require a 12 volt power supply. There is a range of power supplies available such as
Visit Product PagePhone:
0116 321 4120
Email:
cs@wled.co.uk
Location:
86, Scudamore Road, Leicester
LE3 1UQ