Download the spec sheet for the 24V Single Colour LED Strip Lights, 60 x 5050SMD, 14.4W here. Great for use anywhere, this dimmable 24v 14.4w/m single colour LED strip light can help you save a huge amount on your lighting bills or add great effect lighting wherever you need it. As with all of our LED strip lights, it comes with a self adhesive backing, allowing for installation in nearly any location. Due to the wide range of surfaces that the LED Strip Lights are stuck to, we unfortunately cannot guarantee the adhesive on all surfaces. These strips can also be cut to every 100mm making custom lengths of strip very easy to make up. Did you know that all of our LED Tape is dimmable? Simply use alongside a dimmable driver to alter the brightness! You can also benefit from the variety of discount codes that are ran frequently on the site. These discounts can save you up 20% on your whole order. Please note that all IP67 and IP68 tape comes in lengths of up to 5m max, and will not fit in any of our aluminium profiles. IP65 tape comes in maximum lengths of up to 25m, and will be soldered tape to tape every 5m for any lengths over 5m. Although 25m lengths are available in this way, there is no guarantee that it can be ran continuously due to power drop. Please get in touch with us if you require further information about this. IP20 tape may or may not come soldered tape to tape, as this depends on how it arrives to us from our suppliers. Find further information on Strip Lights on our FAQs page. Water Protection & Colour Options LED strip lights have a few factors for consideration when installing them, mainly the colour of the LEDs and the waterproofing. Our Mirrorstone 24v LED strip lights are available in two colour options, warm white (3000K) and cool white (6000K). Warm white is what replicates traditional halogen lights closer than any other colour. Warm white provides the soft white colour that traditional light fittings emit. This is recommended for use in living areas such as dining rooms and living rooms. Warm white is also used a lot in bedrooms and hallways due to the colour that it emits. If the room you're looking at installing the strips lights into has a more traditional styling to it then warm white is, again, recommended over cool white. Unlike warm white, cool white is a cooler, clearer white. It has more use in rooms that require as much light as possible such as bathrooms due to its cooler colour. Modernly design rooms and houses are also recommended to have cool white due to its colouring. Both of these colours are also available in different IP Ratings to add to the range of uses. Both are available in IP20 and IP65 ratings for full internal use. ■ IP20 Rated LED strips have no protection against water and need to be installed where water cannot reach the strip lights. ■ IP65 Rated strip lights come with a layer of silicone on them to protect them from splashes and jets of water. They are generally installed in bathrooms to combat the steam and water as well as externally where water access is very limited. As all IP Ratings of LED strip have a varying level of silicone on them, they come in different maximum lengths. IP20 is available in a max length of 10m whereas IP65 is available in lengths of up to 5m. All LED Tape is charged by the metre though - when filling out the quantity box at the top of the page, please round up to the nearest metre. Customer Cutting Service As mentioned previously these strips can be cut every 100mm. We are aware that not everyone has the...
Visit Product PagePhone:
0116 321 4120
Email:
cs@wled.co.uk
Location:
86, Scudamore Road, Leicester
LE3 1UQ
