Warm up your garden, home, warehouse or office with a brilliant infrared bar heater. Mirrorstone’s infrared heaters are efficient, eco-friendly, and more attractive than any conventional radiator. It measures approximately 980mm by 345mm, and with a 2200w power output, can heat an area of around 34m2. It has a depth of just 50mm, which means it can be installed on your ceiling or wall without sticking out too much. It is made from aluminium and glass, which look superb. That’s not all, though; it has a premium feel that really reassures you of its quality. It can reach a surface temperature of around 200-300˚C, but this won’t be an issue. That’s because, although it’s hotter than a traditional radiator, it can be installed far out of reach. It can be installed high up on the wall, or even on the ceiling, so it’s unlikely you’ll accidentally touch it. It is completely IP44 rated out of the box, so it’s protected against any accidental splashes of water. However, if it to be installed outside, we would recommend it is under cover, so that heavy rain cannot damage it. Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room. Infrared Heating Information Infrared heating is a revolutionary way of heating your home that far outstrips a traditional heater. An infrared heater can actually save you around 60% on your heating bills! It does this through warming the objects in the room, rather than the air around it. This is far more efficient due to the surface area of the objects in the room being less than the volume of air. It fires infrared beams around the room that bounce off of the objects, leaving them warmed. In contrast, a conventional radiator warms the air, which causes convectional currents. This is where the warm air rises, cools, and falls again, requiring more heat. This can also promote dust circulation, mould growth, and cold spots, which is why infrared heaters tend to be better for your health. Infrared heating is also completely safe. It uses the same technology as your TV remote control, or even heat vision, and the heat it provides is the same that the sun’s. However, infrared heating does not produce any of the harmful ultraviolet radiation as the sun does. Installation is Easy Forget about getting any professional help in – installation is very easy to do. You won’t need plumbers or electricians – you won’t even need an assistant. It’s a complete and utter DIY job, with no specialised knowledge or equipment necessary. The heaters are completely plug-and-play compatible, so there’s no real work to do, other than actually getting it installed onto the wall. There’s nothing difficult to do. All you have to do is drill a few holes in the wall ready for it to be mounted. Simply screw the rear-mounted brackets into the wall or ceiling, and plug the cable into the wall. Remember, the brackets are adjustable, so you can target the heat at different areas of the room. Please be aware that if the units are not cleaned regularly, a build-up of dust may appear. Find out more about how to maintain your heaters here! Remote Controllable If you’re hoping to control this heater at your own luxury, without having to move, without having to resort to walking over to use the control panel, then it’s your...
Visit Product Page
