Login
Start Free Trial Are you a business? Click Here

Raspberry Pi 4 Heatsink Reviews

4.4 Rating 197 Reviews
Read Pimoroni Ltd Reviews

About Pimoroni Ltd:

The ultimate Maker store — a curated range of the best of breed Maker products. Worldwide delivery. Personal support.

Visit Product Page
Blair Christopher
Verified Reviewer
“If you choose passive cooling for your Raspberry Pi, this is the heatsink for you! I have a ton of those cheap heatsinks that you get with other cases sitting in my leftovers drawer. This is quality starting with the size. The more surface area the better for passive cooling. The metal used is heavy. The adhesive is strong and allows great heat transfer. If I had a suggestion, it would be to make this work with the Fanshim!”
Helpful Report
Posted 7 years ago
“Doesn't fit as advertised. Purchased a new 2GB Pi 4 with this heatsink. This photo shows it mounted with the long side parallel to the GPIO connector. The heatsink won't lay flat against the processor this way - it doesn't fit between the display connector and camera connector (too wide). I rotated it 90 degrees and it fits that way. Unfortunately, because the heatsink is mounted off-center if there's any pressure applied to the edge near the power connector, the heatsink tilts and falls off. Hmmm... not so good.”
Helpful Report
Posted 7 years ago
“Not a good mechanical fit, sloppy application of double sided tape* at the bottom of the heatsink and generally not the quality you would expect from Pimoroni. Better off looking for an alternative as this is clearly a last minute addition to the catalogue that didn't go through much testing at all. * 3M 9448A: Not rated for thermal transfer applications, check datasheet.”
Helpful Report
Posted 7 years ago
Ryan Hodgkinson
Verified Reviewer
“Doesn't sit well on the Pi 4. The edge runs along the gpio so not ideal for using hats. I assumed that it would have a thermal pad covering the ram chip too. Ended up using a smaller heat sink in the end. Not the end of the world though!”
Helpful Report
Posted 7 years ago
Fredrik Lindqvist
Verified Reviewer
“A tiny bit to small to cover 2 chipsets.”
Helpful Report
Posted 7 years ago
“This heat sink is insufficient for my new Raspberry Pi 4 which seems to thermal throttle more or less all the time in a PiBow Coupe 4 case. The heatsink is also very hot to the touch. Taking the Pi4 out of the coupe case helped a little in that it's not actually throttling at idle. Pretty disappointed. Can I put a fan shim with this and a PiBox 4 case?”
Helpful Report
Posted 7 years ago
“Snug fit and definitely needed, quick and easy to install.”
Helpful Report
Posted 7 years ago
Riaz Sulaimi
Verified Reviewer
Author didn't leave any comments.
Helpful Report
Posted 7 years ago