Trend T35A 27L M-Class Wet & Dry Vacuum Dust Extractor 1600 Watts 230v Reviews

4.1 Rating 8 Reviews

Trend T35A 27L M-Class Wet & Dry Vacuum Dust Extractor 1600 Watts 230v A professional wet and dry Class M auto-start vacuum extractor with power take off for professional use This top performing wet & dry vacuum / dust extractor includes the "power take off" feature, which means the unit will automatically power on when you start using your connected tool. FEATURES Dust class category M rated to EN60335-2-69, for dust with workplace limit values > 01 mg/m3 Powerful but quiet 1400 watt silenced motor (max 1600 watt) Power tool take off with auto-start feature of up to 2200 watts and 8 second run-on delay Auto filter shaker and blockage warning light Large 27 litre capacity impact resistant plastic container with castors Extra long 7 metre power cable Extra long five metre hose with power tool adapter HEPA (High Efficiency Particulate Air) cartridge filter with 03 micron filter efficiency and nylon pre-filter Includes floor cleaning kit, power tool adapter, crevice tool upholstery tool and no foam filter Container outlet plug for ease of emptying liquids Ideal for workshop, garage and light trade applications SPECIFICATION Rating: Professional Power Input: 1400 Watt Voltage: 230 Volt Dust Category*: M Power Ampage: 5.2 Amp Auto-start Max. (230v): 2200 Watt* Auto-start Min.: 50 Watt Container Volume (Dry): 27l Container Volume (Wet): 16l Airflow: 4200 L/min (70 L/s) Vacuum Pressure: 270 Mbar Negative Pressure: 21 Kpa Filter Surface Hepa: 2600 cmq Filter Surface Pre-filter: 1400 cmq Filter Efficiency: 0.3 Micron Dust Category: M Protective Class: Ipx4 Hose: 5 m x 39 mm od Bag Volume: 24.5l Dimensions: 350 x 390 x 610 mm Weight: 7.5 Kg NOISE & VIBRATION Sound Pressure Lpa: 75.0 Db(A) Acoustic Pressure Lwa: 89.0 Db(A) *Vacuum cleaners of dust category to EN60335-2-69 for dry vacuuming of materials of exposure limit volume > 0.1 mg/m3 that are hazardous to ones health.

Visit Product Page

Phone:

01325 370300

Email:

help@powertoolworld.co.uk

Location:

Unit 6, Park 2000, Millennium Way,
Newton Aycliffe
County Durham
DL5 6AR

Visit Product Page

“Decent power when used properly, seems much more powerful and more capacity than the T32 I used to use.”

Helpful Report

Posted 4 years ago

“can only review vacuum application at this time. Suction very good at this point, will need more use over time to check endurance. Noise level reasonable. Tool power take off very useful ,works well. Dust filter not tested.”

Helpful Report

Posted 4 years ago

“Very happy with the trend vacuum got very powerful extraction”

Helpful Report

Posted 4 years ago

“Had for less then a month and the power has already stopped working would not advise getting stay far away seems cheap and good but just spend more”

Helpful Report

Posted 5 years ago

Hi, thank you for your feedback. We are surprised to hear this as the feedback that we have received for this product has been most positive. Don’t forget that if you believe the tool to be faulty this will covered by the manufacturer warranty; if you need any support in arranging a warranty submission please don’t hesitate to contact us so we can extend our assistance. Kind regards, Ian@Powertoolworld.co.uk

Posted 5 years ago

“Excellent . The best value M clad on the market”

Helpful Report

Posted 6 years ago

“Very happy with my T35. well made and works well with my tools for self starting.”

Helpful Report

Posted 6 years ago

“This dust extractor works well, really happy how it eats all rubbish and quite silent motor too. Trend could have thought about all bits a pieces storage solution on the device. Some slots as little fixings have been made on hoover body at the back and on both sides but nothing can be found on the appliances to fit there. I worked out myself how to make all this, but that should be pointed to the designers of this machine. Let me put and accent on that is a TREND brand not a Silverline...”