Trend H/JIG/A Hinge Jig Two Part Template Set In Carry Case Reviews

<h2>Trend H/JIG/A Hinge Jig Two Part Template Set In Carry Case</h2> <p>The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors &amp; frames using a plunge router.</p> <p><strong>FEATURES</strong></p> <ul> <li>It is easy to use with minimal setting-up time, completing the job both accurately &amp; quickly</li> <li>Used on-site &amp; in joinery shops to increase productivity with excellent results</li> <li>Four apertures for fire door requirements</li> <li>No need for marking out in the conventional way</li> <li>Quick &amp; simple to set-up as the hinge is used as the pattern</li> <li>Clean &amp; accurate recesses are achieved every time. Suitable for timber based doors &amp; square butt hinges</li> <li>Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops</li> <li>Use with a light duty plunge router with 1/4 inch collet</li> <li>Long reach router cutter required, 12mm diameter with 70mm overall length</li> <li>Angled position slots to prevent creep</li> <li>Unibase may be needed</li> </ul> <p><strong>SPECIFICATION</strong></p> <ul> <li>Length Min.: 2 5/8" (67 mm)</li> <li>Length Max.: 5" (127 mm)</li> <li>Width Min.: 3/8" (9.5 mm)</li> <li>Width Max.: 1 3/8" (35 mm)</li> <li>Width Max. in 35mm Rebate: 20 mm</li> <li>Width Max. in 44mm Rebate: 30 mm</li> <li>Door Sizes Possible:&nbsp;Height Min.: 6' 5" (1955 mm)</li> </ul>

Phone:

01325 370300

Email:

help@powertoolworld.co.uk

Location:

Unit 6, Park 2000, Millennium Way,
Newton Aycliffe
County Durham
DL5 6AR