Makita 18v LXT DHP483 Combi Drill and DTD155 Impact Driver Compact Cordless Brushless Twin Kit in Black with 2x 5.0Ah Li-ion Battery Packs, DC18RC Charger and B-57015 – 38 Piece Drill Bit Set in a Makpac Type 3 Connector Case
The Makita DLX2221BT2 is the DLX2221J twin kit in an exclusive black finish. It's a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x BL1850B 5.0Ah Batteries, DC18RC Fast Charger and a Makpac Type 3 Connector Case.
Makita DHP483ZJ 18v LXT Brushless 2-Speed Combi Drill
The Makita DHP483 has been developed for light duty tasks, with compact body and great endurance thanks to its brushless motor. At only 176mm long and 1.6 Kg with a 3Ah+ battery attached, this drill can be used above your head or in tight spaces with minimal fatigue.
FEATURES
Variable 2-speed, reversible, Makita Brushless Motor
Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
20 clutch settings deliver up to 40 Nm of torque
All metal gears for more efficient power transmission
Ultra-compact design (only 176mm long)
Twin led jobs light with pre-glow and after-glow functions
Ergonomically designed high comfort grip
Specially developed for light drilling / screw work
SPECIFICATION
Voltage: 18v
Soft Application Max Torque (Nm): 23
Hard Application Max Torque (Nm): 40
Torque Settings: 20 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / Pre-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-1,700
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-500
Chuck Type: 3-Jaw / Single Sleeve Keyless
Chuck Capacity (mm): 1.5 - 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 6 x 75
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 36
Impact Rate (BPM) High: 0-25500
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-7500
Overall Length (mm): 176
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.3
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.6
Brushless Motor: Yes
Makita DTD155Z LXT 18v Li-Ion Brushless Cordless Impact Driver
The Makita DTD155 is a cordless, Brushless Impact Driver powered by 18v Li-ion battery and has been developed as an 18 volt version of the TD111D. It features Makita's new impact mode, "A-Mode" aka "Assist Mode" which helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening.
FEATURES
3 operating modes allow a wide range of applications: 2 speed levels + "A Mode"
"Assist Mode": Assisted screwing with push button, soft & slow start -> automatic acceleration -> tightening with maximum speed
BL Motor without carbon brushes: no maintenance and low energy consumption, therefore longer battery life
Enhanced moisture and dust protection with the XPT system (eXtreme Protection Technology)
Ergonomic design for optimum hand control
Ergonomic handle with soft coating for high working comfort
One-touch bit installation with 1/4" hex chuck
Powerful double LED lighting
Electric brake
Variable speed control by trigger
Forward and reverse rotation
SPECIFICATION
Voltage: 18v
Max Torque (Nm): 140
Brake Type: Electric
LED Job Light: Yes / Twin
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward & Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): H: 0-3000 S: 0-1300
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M14
High Tensile Bolt Capacity: M5-M12
Coarse Thread Length Capacity (mm): TBC
Max. Impacts Per Minute (ipm): H: 0-3900 S: 0-1600
Driving Shank: 1/4" Hex
Overall Length (mm): 135
Net Weight (Kg with 1.5/2Ah Battery): 1.2
Net Weight (Kg with 3/4/5Ah Battery): 1.5
Brushless Motor: Yes
Phone:
01325 370300
Email:
help@powertoolworld.co.uk
Location:
Unit 6, Park 2000, Millennium Way,
Newton Aycliffe
County Durham
DL5 6AR
