Makita 9911/2 Belt Sander 76mm Belt Width 650W 240v Reviews

4.3 Rating 3 Reviews

Makita 9911 Belt Sander 650W 76mm x 457mm Belts The Makita 9911 is a compact belt sander intended for light trade use. It has a 76mm x 457mm (3" x 18") abrasive belt. It's unique design which allows flush sanding to a wall with side of sander. FEATURES Lightweight and well balanced for smooth operation Highest capacity at sanding and dust-collection among the same class sanders Electronic speed dial allows you to match the rate of sanding to individual jobs for added control Auto Tracking System means belt requires no adjustment after mounting as it will centre itself on start up Low noise at only 82dB for quieter operation For sanding woods, floorboard renovations or metal; Cleaning stains on floors or walls; rust or paint removal Flat top design allows sander to be turned and used as a bench top tool 650 Watt motor Variable-speed-trigger Constant speed under load SPECIFICATION Belt Size: 76 x 457 mm Input Wattage: 650 w Belt Speed: 75 - 270 m/min Net Weight: 2.6 kg NOISE & VIBRATION Noise sound pressure: 83 dB(A) Noise sound power: 94 dB(A) Noise K factor: 3 dB(A) Vibration K factor: 1.5 m/sec² Vibration: Sanding: 2.5 m/sec²

Visit Product Page

Phone:

01325 370300

Email:

help@powertoolworld.co.uk

Location:

Unit 6, Park 2000, Millennium Way,
Newton Aycliffe
County Durham
DL5 6AR

Visit Product Page

“Bit under-powered. Applying a bit of pressure bogs it down but is fine for removing material on smaller jobs or where care is needed. I always buy Makita, hence the purchase, but would suggest the equivalent Bosch as it has a larger sanding area. It’s also more powerful but this may just be to cope with the longer belt.”

Helpful Report

Posted 1 year ago

“A little unsure about this before I bought it as this was going to be a put me on stop gap to do the job while my Makita BO6030 sander was in the repair shop enough about that though. This sander is a decent work horse for it's size & has loads of grunt on tap to tackle the toughest of rough sawn treated timber to smooth off for milling up to spray seal up and creocote up the sander is superb just make sure you plug this into a power take off dust extractor because the bag fills up very quickly then it blocks up so all I did was put my air blower to it and cleared it but no regrets in buying it so anybody looking for one I say buy this one it's a solid choice purchase & well done for Powertool World for dispatching promptly.”