Easi-Fix Crack Stitching Kit incl.10 Bars Reviews

4.8 Rating 38 Reviews

Wall Crack Repair Kit
Our Easi-Fix Crack Stitching Kit contains all the components needed to permanently repair vertical or stepped cracks in masonry walls. It uses high quality helical bars that are easy to install and highly effective.

Visit Product Page

Phone:

0117 982 3282

Email:

sales@permagard.co.uk

Location:

Unit B2-B5, Worthy Road,
Chittening Industrial Estate,
Bristol
Gloucestershire
BS11 0YB

Visit Product Page

“Used before and does the job,will use again”

Helpful Report

Posted 5 years ago

Jose De Souza

Verified Reviewer

“Very impressed with the kit supplied (Cox gun), easy to use although you need to get everything to hand and ready before mixing the grout because you need to work quickly before it sets. Warning - My first attempt - The rubber washer on the gun plunger was not a tight enought fit resulting in a lot of grout escaping behind the plunger and panic, thankfully it was only a meter to do. Tightening the back nut squashes the rubber washer out so a better seal is achieved less/none grout escapes (see instructions). Did 4 metre run in one go, on the next attempt - no problem. Would buy again.”

Helpful Report

Posted 5 years ago

“Stitching kit did the job great easy to use plenty of cement base in the tub went along way”

Helpful Report

Posted 5 years ago

Joseph Morris

Verified Reviewer

“Easy to understand instructions, and it all seemed to work well. The only issue I had was actually getting the grout into the cartridge gun without it slopping all over the place!”

Helpful Report

Posted 5 years ago

“Easy to use great product use it again in again”

Helpful Report

Posted 5 years ago

Simon Allwood

Verified Reviewer

Author didn't leave any comments.

Helpful Report

Posted 5 years ago

“I found the grout gun difficult to use. I even bought some SBR Bonding agent to give the grout mix more elasticity. The small nozzle was just impossible, even after making it wider. Even when using the big nozzle I found that the grout mixture would seep around the sides of the pushing mechanism, even after adjusting it to make it as wide as possible. And due to the design, there was always a large amount of grout left in the bottom of the tube, so emptying it after each use was time consuming. The end of the mixing paddle came loose after 5 uses, but I was able to super glue the end back on, and used it more carefully for another 5 batches. Other than that, the grout was easy to use with a trowel, and set around the helical bars really well. I will definitely buy those items again.”