Osmo Polyx oil tints has all the same advantage as standard Polyx oil but has a transparent coloured finish designed to harmoniously change the tone of the wood whilst leaving the grain still visible. Osmo Polyx Oil Tints are available in multiple sizes including small tester sachets, always test first to ensure the right finish.
Polyx - Oil Tints have all the same renowned properties as the standard Polyx Oil but are designed to give a transparent coloured satin wood finish designed to give a consistent and harmonious finish for for wooden floors and furniture. It is only recommended for use with light coloured wood. It is strongly recommended that a test is done before the main application as the final finish can be greatly effected by the age and condition of the wood.
Key features:
Transparent and satin finish for interior use
Especially recommended for wood flooring and furniture
Water repellent, dirt resistant and durable
Available in 5ml sachets, 125ml, 750ml & 2.5 litre tins
1 litre will cover approximately 24 square metres with a single coat
Standard flooring application requires 1 coat and when fully dried a single coat of clear Polyx oil over the top. Different finishes can be achieved, please see the full instructions for more details.
Easy application with no need for a primer or sanding between coats
Microporous so does not crack, flake, peel or blister
Typical shelf life of 5 years.
Available Finishes:
3040 - White
3067 - Light Grey
3071 - Honey
3072 - Amber
3073 - Terra
3074 - Graphite
3075 - Black
Sizes:
5ml test sachets, 125ml test/small application pots, 750ml, 2.5 litres
Application Tips:
Always stir well before use, sing a flat stirring stick or spatula
Always carry out a small test on an inconspicuous area before making the main application as the final appearance will be as much down to the timber its being applied to as the product being used.
Surfaces can take 2-3 weeks to fully cure so avoid putting objects on treated surfaces until fully cured.
Do not use a clear Polyx oil over 3040 white as it will cause yellowing.
If a wider range of colours are required please see the range of Wood Wax finishes in both transparent and intensive.
When using in most areas such as bathrooms and kitchens a base coat of 4006 Wood Protector is recommended. This may darken the wood slightly so a test area should always be done first.
Never use multi use kitchen or bathroom cleaners or any other strong detergent such as washing up liquid as they will damage the surface. For the cleaning of surfaces we recommend Osmo interior spray cleaner 8026 or Osmo Wash and Care.
The matting agents in 3062 Matt may cause a chalky appearance when applied over dark tints so always do a test first and if in doubt use 3065 semi matt.
For a lightly stained effect wipe away the product along the grain with a lint free cloth within 20 minutes of application.
Technical Information:
Coverage is approximately 30m² per litre with a single coat
Generally it is recommended to only apply a single coat followed by a coat of clear Osmo Polyx Oil.
Interior use only
Minimum application temperature is 5°C
The drying time is approximately 24 hours with good ventilation at normal room temperatures.
Allow 2 - 3 weeks to fully cure.
Please note that the colours shown are only intended as a guide to the final colour achievable. The colour will be displayed diferently on different monitors and printers and the effect achieved with the product will depend on the type of wood, porosity etc.
About New Venture Products Ltd:
New Venture Products specialise in supplying and distributing safety, security and protective paints and coatings to the trade and general public. New Venture Products has been selling Protectakote and now its sister product Safekote since 1998 and keep a large range of colours in stock for immediate delivery throughout the UK & Europe both by pallet and courier. New Venture Products also stock all the primers, thinners and application rollers required to get a professional result on most materials.
Visit Product PagePhone:
01235427000
Email:
sales@newventureproducts.co.uk
Location:
Unit 8 The Glenmore Centre,
Grove Business Park,
Wantage
Oxfordshire
OX12 9GN
