Osmo Natural Oil Woodstain is a microporous & breathable oil based finish for exterior wood only. Water repellent, weather and UV resistant (not the 701 Clear) whilst retaining the appearance of the grain. It is also resistent to mould, algae and fungal attack. Easy to apply with excellent coverage. Large stocks including full range of sachets available.
Osmo Natural Oil Woodstain is a decorative, satin (not the clear 701 which is matt), oil-based protective finish for exterior wood. It is microporous which allows the wood to breath and reduces the risk of swelling and shrinkage but it does not hide the grain. The finish is water-repellent, extremely weather and UV resistant. The finish contains active ingredients which protect it from mould, algae and fungal attack. The finish is proven over decades in all kinds of climatic conditions, and does not crack, flake, peel or blister.
Area of Use:
Osmo Natural Oil Woodstain is suitable for external use only as it contains biocides.
Key Product Features:
Easy to renew, no sanding or primer necessary, simply clean and apply remedial coat.
Easy to apply, does not dry during application.
Fast drying
The natural wood grain remains visible.
Weather & UV resistant (Nb. the clear version, 701, offers no UV protection)
Very resistant to water & dirt
Active ingredients protect against algae, mould, mildew and fungal attack
Reduces wood swelling and shrinkage
Microporous breathable finish so doesn't crack, flake or peel
Osmo Natural Oil Woodstain Standard Finishes:
Pine 700
Clear Matt 701 (No UV protection)
Larch 702
Mahogany 703
Oak 706
Walnut 707
Teak 708
Stone Pine 710
Ebony 712
Rosewood 727
Red Cedar 728
Fir Green 729
Oregon Pine 731
Light Oak 732
White 900
Basalt Grey 903
Patina 905
Pearl Grey 906
Quartz Grey 907
Coverage for Osmo Natural Oil Woodstain:
1 litre of Natural Oil Woodstain will cover approx 26m2 on smooth timber and approx 12m2 on rough sawn wood. The coverage on absorbant timbers can be significantly improved by coating with 4001 WR Base Coat first. Please note grooved decking requires approximately 30% more than smooth decking due to the increased surface area.
Suitable Applications:
Osmo Natural Oil woodstain is suitable for most exterior woods (dimensionally stable and non dimensionally stable): doors, windows and windowsill, carports, timber cladding, balcony, wooden decking, screens & fences, pergolas, garden houses and furniture. Please note that when applied to decking or any area subject to foot traffic only a single coat should be applied and then the product must be overcoated with anti slip decking oil (Osmo 430).
Product Application:
The wood must be clean, dry, frost free and have a maximum moisture content of 20%. When possible apply Natural Oil Woodstain to all sides of the timber before installation. Any previous application must be thoroughly cleaned before application, any non porous coatings such as paints and varnishes must be completely removed back to bare timber and any dust removed before any application.
Any organic growth of moss, lichen, mould etc must be removed with Osmo Gard Clean or Flag Asipo Algicidal wash before application, holes or gaps should be filled with a suitable Exterior Gap Sealer, grey or silvered timber can be removed with Osmo Wood Reviver Gel, end grain can be sealed with Osmo End Grain Sealing Wax and if any additional protection is required against insects, rot or blue stain the timber can be pre-treated with Osmo 4001 WR Base Coat.
Osmo Natural Oil woodstain should be applied with an Osmo Flat Brush, microfibre roller or any appropiate brush. It should be applied thinly along the grain and spread well. In normal climatic conditions allow to dry for approximately 4 - 6 hours with good ventilation before applying a second coat. For renovation a single maintenance coat is usually sufficient.
Please Note:
The colour tone created when you apply Osmo Natural Oil woodstain is influenced greatly by the natural tone of the wood and may deviate from the colour chart so a test area must always be done before the main application. Clear finishes offer no UV protection and are therefore not recommended for surfaces exposed to strong sunlight. Dried surface is satin-glossy at first and is afterwards satin. To extend the life of the finish, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear or Osmo 410 after thoroughly drying. (Not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other.
Osmo Natural Oil Woodstain contains biocides and is therefore only to be used on exterior areas. The added active ingredients delay or minimize the risk of algae and fungal attack.
*Please note that the colour shades displayed are a true likeness of the original however different output methods (screens & printers) will cause variation in co
About New Venture Products Ltd:
New Venture Products specialise in supplying and distributing safety, security and protective paints and coatings to the trade and general public. New Venture Products has been selling Protectakote and now its sister product Safekote since 1998 and keep a large range of colours in stock for immediate delivery throughout the UK & Europe both by pallet and courier. New Venture Products also stock all the primers, thinners and application rollers required to get a professional result on most materials.
Visit Product PagePhone:
01235427000
Email:
sales@newventureproducts.co.uk
Location:
Boston House,
Grove Business Park,
Wantage
Oxfordshire
OX12 9FF
