Two Part Water Based Epoxy Floor Paint 2.5 Litres Light Grey Reviews

5 Rating 2 Reviews
Read New Venture Products Ltd Reviews

Tough, High Quality Two part water based Epoxy Floor Paint. Ideal for high wear areas requiring a tough coating. Also available with an anti slip additive to give a tough anti-slip finish.
NVP's two part water based epoxy floor paint (available with or without an anti-slip additive) is a high quality two part water based epoxy floor coating for all applications where a high durability paint that is resistant to oil, grease and most chemicals is required. It is easy to apply with a standard roller or brush and has the added advantage of very low odour during application and curing. Once fully cured you are left with a tough, non-toxic, waterproof and easy to clean surface.
 
Colours (according to BS4800): Black, White, Light Grey (00A05), Mid Grey (00A09), Blue (20D45), Red (04C39), Green (14C39) and Safety Yellow (10E53). These colour references are approximate due to the nature of the product. Other colours can be made to order, please phone for details and prices.


Technical Information:

Tin Sizes:                           2.5 and 5 Litres
Finish:                                Semi-Gloss
Components:                     Two and cold water
Touch Dry:                         4 - 6 hours at 20°C, 50% relative humidity
Light Foot Traffic:              10 - 12 hours (20°C, 50% relative humidity)
Full Cure:                           5 - 7 days
Overcoating time:               2 - 6 hours (20°C, 50% relative humidity)
Cleaner:                             Cold water
Shelf Life:                          12 months
Storage Conditions:           5 - 25°C keep away direct sources of heat and sunlight
Cleaning of cured coating: Hot soapy water
Min. Application Temp:      10°C


Product Uses:


For application in areas where solvent based paints are unsuitable.
As a high durability coating for all floor areas such as warehouses, workshops, garages, showrooms etc.
Solvent free making it ideal for use in hospitals, kitchens and areas of food preparation.
Because it is oil and grease resistant it is ideal for garage floors.
Chemical resistant so ideal for areas of food manufacture and storage. i.e. dairies, grain silos, breweries, abattoirs and fisheries.
Suitable for application to concrete, brick, stone and timber. Can be applied to asphalt but we recommend a test area is done first. 


Advantages: 


Tough and hard wearing, suitable for vehicle traffic.
Excellent resistance to abrasion.
Easy to apply, no skilled labour required.
Will not taint water or food once cured.
Bonds to most surfaces except unprimed metal.
Anti-slip option is available.
Resists oil, grease and petrol.
Suitable for internal or external use (depending on conditions should last for 3 - 5 years minimum).


Coverage:


Approximately 5 - 7 m2 / litre. On uncoated surfaces we recommend applying 2 coats.
When applying to absorbent surface such as bare concrete or ply the first coat should be diluted by an additional 10% of clean water.
Apply with standard short pile rollers or by brush
Please note as with all two part products once the two components are mixed together and the water added the pot life is only between 1 & 2 hours, we therefore recommend that a separate tin is bought for each coat.
Available in 2.5 and 5 litre tins.

Slip Resistance:
NVP's two part epoxy floor paint has been independently tested when mixed with NVP's anti-slip additive and gives a SRV of 67 in the dry and 61 in the wet. Using the UK slip resistance group guidelines these give an extremely low potential for slip in the dry and a low potential in the wet. Please note however there are many variables involved in the slip resistance of a surface so these can only ever be used as a guide.


Warning:
Please note as with all water based paints, our water based Epoxy Floor Paint should only be used when the substrate and ambient temperatures are above 10°C and it should not be stored at below 5°C.


*Please note that the BS 4800 codes and samples shown are intended only as an approximate guide. Colours will vary depending on the settings of your monitor and the light that you view it in. The BS 4800 codes are the nearest colour references available but are not necessarily an exact match.

 

About New Venture Products Ltd:

New Venture Products specialise in supplying and distributing safety, security and protective paints and coatings to the trade and general public. New Venture Products has been selling Protectakote and now its sister product Safekote since 1998 and keep a large range of colours in stock for immediate delivery throughout the UK & Europe both by pallet and courier. New Venture Products also stock all the primers, thinners and application rollers required to get a professional result on most materials.

Visit Product Page

Phone:

01235427000

Email:

sales@newventureproducts.co.uk

Location:

Unit 8 The Glenmore Centre,
Grove Business Park,
Wantage
Oxfordshire
OX12 9GN

Mark Bigwood
Verified Reviewer
Very pleased with the water based epoxy paint. Using it on osb board so its by no means smooth. Paint covered well and has dried to a good hard shiny surface. Havn't had a chance to check its wear but it seems to be tough enough.
Helpful Report
Posted 4 years ago
Timothy Aldworth
Verified Reviewer
Very clear instructions, I used a brush to apply the product to a workshop floor. Took a tad longer to dry hard, probably due to the temperature being only around 14 Degrees Celcius. Finish is now really hard wearing and not slippery at all. I bought the non-slip additive, but have not seen the need to apply as yet.
Helpful Report
Posted 5 years ago