Login
Start Free Trial Are you a business? Click Here

Ramair TorqIntake Induction Kit MX5 Mk3/3.5 Reviews

4.8 Rating 5 Reviews
Read MX5parts Reviews

Originally designed by Skuzzle Motorsport, and manufactured to the highest quality in the UK by RamAir Filters, this is the only NC intake kit on the market that gives proven dyno gains.The Skuzzle TorqIntake induction system is the only known NC induction system to have been 100% designed on the dyno. Many hours of research, testing and development have gone into this system to produce a product which Skuzzle Motorsport are proud to put their name to.The Skuzzle TorqIntake was built around the science of pulse waves. As pulses are generated inside the intake system, the length of the Skuzzle TorqIntake has been precisely tuned so the pulse is reflected back into the engine and amplified pushing a higher pressure of air into the cylinder, drastically improving midrange torque.The science doesn't end there either. The Skuzzle TorqIntake also makes use of 2 venturi effects. The pipe diameter is altered in 2 strategic places along the Skuzzle TorqIntake to maximise air velocity at higher rpm. This allows the Skuzzle TorqIntake to boast impressive gains to top end horsepower too, nearly 10bhp at 7000rpm.Finally we have a velocity stack built into the high flow air filter. The idea of a velocity stack is to premote laminar flow (where the air enters the induction pipe smoothly and adheres to the intake pipe walls to reduce turbulence at high rpm).The Skuzzle TorqIntake, designed at Skuzzle Motorsport is now profesionally hand fabricated in the UK by RamAir using only the highest quality aluminium tube. The high flow air filter is manufactured by RamAir specifically for the Skuzzle TorqIntake and is made to the same standards as all other filter products produced by RamAir.Click here for a comprehensive fitting guide! Fits all Mk3 & 3.5 models, 2005>2012Please Note: To fit this kit you will need to remove the front bumper. Also, the dyno results given are an indication of the power increase achieved on the car this kit was developed on. They are no guarantee that your vehicle will benefit from the same increase as this will depend on many different factors such as engine size, other modifications and overall vehicle condition. 

Visit Product Page

Phone:

02392 644588

Email:

sales@mx5parts.co.uk

Location:

1 Orion Court, 5 Rodney Road,,
Portsmouth
PO4 8SZ

Rate MX5parts out of 5
Easy to fit aslong as you have basic knowledge of tools. Ratchets mainly and patience. Not giving you loads of torque or noise being naturally aspirated. But its definitely freed up some of the rev range.
Helpful Report
Posted 3 months ago
James Hollingworth
Verified Reviewer
It’s a good kit and gives a lot better throttle response as well as still does give a slight induction noise especially when rev matching, she kit itself to fit is a bit of a headache with having to take off the front bumper probably took me at home about 3hrs to fit
Helpful Report
Posted 6 months ago
Rate MX5parts out of 5
Great instructions everything was there
Helpful Report
Posted 1 year ago
Vlad Ichimescu
Verified Reviewer
Installed and working great on a 2010 NC2 and 2014 NC3 based on the instructions linked in the product description (for NC3 I had to remove the front bumper reinforcer bar armature and it's pressed against it so it's really tight)
Helpful Report
Posted 7 years ago
Johan Stridsberg
Verified Reviewer
Hi !Install this on my MX-5 2011 NC todayVery happy with the install, take some time because you have to remove from bumper to install it..Too bad there was no instructions, but google and manage to get It on with no problem, then just start up the car and took i very long trip for ECU to mapp it..Very good response in higer RPM, and went from 0,73 to 0,65, I have also a Cobrasport exhaust on it, and that make some difference to because that you pull from the front must get out there back....I am a very happy swedish now :-)
Helpful Report
Posted 11 years ago