LED Daytime Running Lights With Fog Lamps MX5 Mk3.5 Reviews

5 Rating 2 Reviews

LED DRL kit with integrated 70mm diameter fog lamps for the NCFL. The DRL's are formed of 6 high quality Hella "dragon" LED's about 30mm in diameter, that emit a bright white light. All the lamps supplied in this kit are ECE & SAE marked and meet all legal requirements.Fitting is easy as this kit simply replaces the existing lamps and is supplied with instructions, wiring and all the required fixings. Please note, the housing must be painted to match your vehicles colour before fitting. This is a service we do not currently offer. Also, if you do NOT currently have fog lamps fitted to your vehicle, you will also need to replace the steering column switch.Fits all Mk3.5 models, 2009>2012 (These will not fit the very latest 2012> facelift)Please Note: This kit does NOT include the chrome bezels shown in one of the large photos. However click here for them as they do look great!

Visit Product Page

Phone:

02392 644588

Email:

sales@mx5parts.co.uk

Location:

1 Orion Court, 5 Rodney Road,,
Portsmouth
PO4 8SZ

Visit Product Page

Martin Pritchett

Verified Reviewer

“Just like to say fantastic and look great i must say i did not fit them , my friends garage did all the hard work , they did spend some time to fit it and get it right but it was well worth it . Had them painted in pearl white. the instruction are not the best but they work it out”

Helpful Report

Posted 5 years ago

Alastair Matthews

Verified Reviewer

“I am writing a bit of detail as I spent ages trying to decide whether to have a go at fitting these as it must be over twenty five years since I did anything much more to a car than wash and polish it, though as a youngster I did some significant work on my first few cars. I'm guessing there may be a few others out there who are also a bit nervous about going ahead with this. I ended up having to take the front bumper off to get at things properly but this was straightforward as I did a web search and found the original Mazda instructions for fitting foglights which were excellent and easy to follow. I struggled to find an ignition switched electrical feed and ended up piggybacking the feed in the interior fusebox for the Aux 12v socket and routed the wires under the dash and out through the gromet up under the right hand side of the dash where the bonnet release cable runs. When it wasn't clear which wires went to where Andy at MX5 was great and replied the following day by-mail. One feed from the fusebox, one to earth and the other one to the wire feeding the side lights so that when the lights car side lights are turned on the DRLs turn off. The fitting took me about 6 hours, but anyone used to this sort of thing would do it in half that time I'm sure. The parts fitted very well and were of high quality.I had ordered Aluminium Silver paint and lacquer online so had already prepared and painted the units before I started the fitting.The units work perfectly and the whole thing looks great painted in matching paint and with the chrome pieces on each side which Iordered separately. Highly recommended and if I maaged it can't be too difficult!Alastair”

Helpful Report

Posted 13 years ago