Sensor Water Temperature Rear MX5 Mk1 1.6 Reviews

5 Rating 3 Reviews

Genuine Mazda PartGenuine Mazda water temperature sensor. This is the second sensor located on the back of the cylinder head which sends it's signal to the ECU. Green, with two small connectors.Fits all 1.6 Mk1 models, 1989>1998

Visit Product Page

Phone:

02392 644588

Email:

sales@mx5parts.co.uk

Location:

1 Orion Court, 5 Rodney Road,,
Portsmouth
PO4 8SZ

Visit Product Page

Rate MX5parts out of 5

“Really erratic idle, almost to the point of stalling once warm and very reluctant acceleration below 3200rpm, cured instantly by replacing this sensor. Fitted just under the coil pack it's an easy DIY job. Watch the YouTube videos!”

Helpful Report

Posted 1 year ago

Knut Nilsson

Verified Reviewer

“My '92 Miata has been running poorly for over two years, with very poor idling, stalling and start problems, but still no codes. I've tried changing the oxygen sensor, fuel and air filters, plugs and leads to no avail. My mechanic suggested a new coil pack and mass air flow meter. Luckily I decided to get this one first - the old Mazza now runs like new!”

Helpful Report

Posted 7 years ago

Gordon Saunders

Verified Reviewer

“Yey it's fixed!Having read forum after forum, it turns out this little bad boy has been a very bad boy indeed!Poor idle, cutting out, poor running when warm/hot, spluttering and coughing? Change this sensor first. Be sure to replace genuine only.Remove the coil pack, remove the metal spring clip from the green sensor connector, take a 18ml spanner/socket to the sensor and replace. Difficulty - 3/10 I'd say (and I ain't a mechanic!)Also a big thanks to MX5 parts for their great service.Hope this helps :)”

Helpful Report

Posted 12 years ago