We don't have reviews for Malone Channel Loader Kayak Load Assist Module. Please check back later.

Visit Product Page

Phone:

01656745774

Email:

sales@escape-watersports.co.uk

Location:

Unit 12Village CourtVillage Farm Industrial Estate
Pyle
CF33 6BX

Visit Product Page

“This works well but needs care. IMHO the V shape of the roller is a bit too 'shallow' and a bit too 'slippery.' The first time I tried it my kayak slipped off the roller. I was partly to blame as the car was parked on something of a slope. Since then I have stuck some Gripfast tape on the roller and now take care to only use it when the car is parked level. Now I've got the hang of it and it works fine. The suction pads need careful placing to make sure the suction is working as it should. Build quality is good.”

Helpful Report

Posted 2 years ago

“This works well.. suctions on to a back of a clio window .. it’s just a matter of setting the angle right to start with.. otherwise the suction caps will be too close together.. or not enough play for the window curve.. you do need to have a clean surface and some pressure to set it.. obviously I don’t leave it long on the window before using it.. it cuts the lift out and my Delphin just slides in to place with little effort”

Helpful Report

Posted 2 years ago

“Purchased for loading sea kayaks onto a Suzuki Vitara. It copes well with the slight curve of the rear screen and makes loading/unloading a doddle. I'm using uprights but haven't tried putting the boat into J Bars yet via the roller. Overall I'm impressed with the rollers ease of use and would definitely recommend it.”

1 Helpful Report

Posted 3 years ago

“Unfortunately it pops straight off the car window the minute the weight of the kayak comes onto it. Also check the shape of the foam and the shape of your kayak. I don't think that groove does anything - if anything it hinders and provides less support. Real shame. Has proved utterly useless!!”