Driftworks poly Subframe bushes - Nissan Reviews

4.67 Rating 3 Reviews
Read Driftworks Reviews

Drifting puts a lot of stress on subframe bushes, especially on an older car and especially when an uprated or welded diff is fitted These poly subframe bushes for Nissan 200sx S13/S14/s15, Skyline Gtst R32/R33/R34 and 300ZX Z32 fit in place of the standard bushes and tighten the rear end up a treat. They come with 3mm thick laser cut steel washers which ensure the bushes can't go anywhere once they're fitted. These are significantly uprated compared to standard bushes whilst still leaving a little bit of compliance so it's not too harsh.<br /> Please note these raise the subframe slightly, which whilst good for suspension geometry, may require a washer to space the retaining nut properly.

Visit Product Page

Phone:

01217922000

Email:

shop@driftworks.com

Pleased with the quality, 2 of the washers need to get cut a bit to fit though..
Helpful Report
Posted 1 year ago
Great product and fitment. When contacted for installation help, DW responded quickly. Would recommend!
Helpful Report
Posted 1 year ago
Easy to fit, has made the back alot more predictable when hanging out
Helpful Report
Posted 8 years ago