Sonus Trim & Motor Kote Reviews

4.5 Rating 4 Reviews

Sonus Trim & Motor Kote
Silicone protectants and dressings wash away after one or two washes, but Sonus Trim & Motor Kote wears like iron!
Are you tired of applying silicone sprays and dressings on your textured plastic trim, wheel well liners, and engine only to have it wash away or evaporate in a matter of days? There is a better way to treat these surfaces: Sonus Trim & Motor Kote™.
Sonus Trim & Motor Kote is an easy-to-apply acrylic wax coating that protects textured plastic, rubber, cast aluminum, vinyl and paint. Designed for high temperature applications, Sonus Trim & Motor Kote withstands 240 to 280 degree temperatures for extended periods, making it the perfect wax coating for your engine, bed liner and other exposed black plastic trim
Sonus Trim & Motor Kote is resistant to water and road salts. Use as an undercarriage dressing to beautify and protect. When applied to clean wheel well liners or painted undercarriage areas, Sonus Trim & Motor Kote restores a fresh, new appearance.
Use Sonus Trim & Motor Kote on plastic rocker panels and under-bumper valences for protection that lasts weeks, not days. The finish is a natural sheen that looks new, not artificial. When dry, Sonus Trim & Motor Kote is not greasy or tacky, so it will not attract dust or dirt.
Sonus Trim & Motor Kote is a spray-on, walk-away acrylic wax sealant. Unlike most dressings, Trim & Motor Kote penetrates, bonds and dries hard to completely protect the treated surface. Silicone dressings and protectants can’t compare.

Makes engines and undercarriages look like new!
Lasts weeks, not days!
Protects engines against corrosion. Replaces OEM factory engine treatment.
Beautifies and protects plastic cladding, rockers and valences.
Outperforms all silicone gels, sprays and creams!
Dries to a satin, dust resistant finish.

Directions:

Shake well before use.
Thoroughly clean and dry engine or trim before treatment.
Apply only to a clean, dry surface.
Protect areas that you do not want coated with Sonus Trim & Motor Kote. A small piece of cardboard makes a good spray shield.
Spray two light coats, allowing 15-20 minutes drying time between coats.
DO NOT WIPE. Allow one hour final drying time before use.
Remove overspray with a damp towel before product dries.
For exterior use only. Not recommended as a tire dressing. After use, flush sprayer with fresh water to prevent clogging.

16 oz. (473ml) spray bottle. Made in the USA!

About CleanYourCar.co.uk:

Established in 2005, Cleanyourcar.co.uk is the UK's leading online Car Care & Car Cleaning Megastore. We import car detailing products from around the world to give you the ultimate choice for when you come to clean your car.

Visit Product Page

Phone:

01484841444

Email:

sales@cleanyourcar.co.uk

Location:

Unit 18a, Holme Mills, West Slaithwaite Road,
Unit 18a, Holme Mills, West Slaithwaite Road
North Yorkshire
HD7 6LS

Visit Product Page

“I expected more from this product and found it little disappointing. After applying the product to clean engine expected it to shine and restore the black plastic trims to good state. This was not the case. The plastic still looks faded.”

Helpful Report

Posted 5 years ago

“I work in a dusty environment so that means my car and engine bay take a lot of cleaning weekly to keep to a good standard, the engine bay I never wanted to "clean" to avoid issues.. so I gave this product a go, I first gave the engine bay a wipe down with a lightly damp cloth, dried off with a dry cloth and then use some of this (light mist) on the bay - Results were AMAZING. Literally the best stuff I've used. Only requires a couple of light mist sprays over the whole engine bay then you leave it to dry, it looks horrible at first and you want to wipe it off but literally leave it for an hour or two and it'll soak into the plastic and leaves it looking like new with a matt sheen to it - It also adds some dust/dirt protection which keeps it a little cleaner for longer. Even the instructions say "resist the urge to wipe" - I was very sceptical about it at first, but gave it a chance and it works exactly as it says - plus I've used it around 6 times now and I still have well over 8/10 left in the bottle.”

Helpful Report

Posted 9 years ago

“This is a very durable and natural/factory look engine bay sealant. It can be used on plastic, rubber and metal to good effect. Doesn't leave a greasy or overly fake shiny look. It just looks very fresh and clean and as it should look.”

Helpful Report

Posted 14 years ago

“Brilliant bit of kit, 'does exactly as it says on the tin'. Used P21S/R222 Total Auto Wash as engine degreaser, washed off, dryed, and applied ST&M - engine looks like new ! Try it you wont be disappointed.”

Helpful Report

Posted 18 years ago