Gtechniq - G1 ClearVision Smart Glass
Gtechniq G1 ClearVision Smart Glass is a dedicated glass sealant that is designed to last for up to two years / 30,000 miles making wet weather driving both safer and less tiring. Also keeps windshields cleaner for longer and makes bugs and ice easy to clean off.
No smears and wiper blade proof.
What's special about Gtechniq G1 ClearVision Smart Glass?
Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability. Gtechniq G1's excellent durability and exceptionally low smear characteristics make it ideal for car windscreens.
Please note that with glass coatings there is a trade off between durability and functionality. Whilst Gtechniq G1 is recommended for car windscreens, for surfaces such as shower screens or marine glass where maximum repellency is required it is better to use Gtechniq G5 ClearVision Smart Glass (Max Repellency).
15ml (12.5m2 per 100ml.)
How do I use this product?
On new glass simply clean the glass and apply the coating using the applicator pads. On old glass we recommend using G4 Glass Nano Polish prior to application in order to remove all contaminants which would interfere with the bonding process.
For the front screen we recommend three coats whilst a single coating is sufficient for side screens.
Application instructions for Gtechniq G1 Smart Glass
Make sure you are working in a well ventilated area, in a temperature that is 5°c or above
Wear gloves and do not apply in direct sunlight
Clean all glass you are going to protect with Gtechniq G6 Perfect Glass Cleaner and an Gtechniq MF5 Power Glass Cloth
For best results machine polish the glass with Gtechniq G4 Nano Glass Polish and a medium pad. Or alternatively, polish the glass with G4 Nano Glass Polish and a hand polishing pad. Apply a small amount and polish in a circular motion
Once finished, clean the glass back to a shine with G6 Perfect Glass and an MF5 or Gtechniq MF1 ZeroR Microfibre Buff Cloth – repeat this as many times as needed to remove all residue
Shake bottle well before use
For windscreens we recommend using 3 layers of Gtechniq G1, but for side and rear screens only 1 layer is needed
Apply a liberal amount of G1 to a Gtechniq AP1 Lint-Free Applicator Pad (supplied)
Work product into the glass in a circular motion covering all of the glass, and leave to cure for 5 minutes
Using a new AP1 apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure
Apply your third layer with the same amount of product on a AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes
Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth
Finish by cleaning the wiper blades and glass with G6 Perfect Glass and an MF5
We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced
Do not expose your car to the elements for at least 12 hours
Store in a cool, dry place
Use G1 and G2 within 3 months of opening
There may be some wiper blade judder, in 90% of cases this will disappear within two weeks.
About CleanYourCar.co.uk:
Established in 2005, Cleanyourcar.co.uk is the UK's leading online Car Care & Car Cleaning Megastore. We import car detailing products from around the world to give you the ultimate choice for when you come to clean your car.
Visit Product PagePhone:
01484841444
Email:
sales@cleanyourcar.co.uk
Location:
Unit 18a, Holme Mills, West Slaithwaite Road,
Unit 18a, Holme Mills, West Slaithwaite Road
North Yorkshire
HD7 6LS
