4.9

(13 reviews)

The Frame Supported Hawk Glazing Barr is a visually unobtrusive and easy to install simple, yet strong, frame supported bar. It consists of a slim 48mm wide, aluminium base section and low-profile PVC top cap that work in unison with roofing sheets varyin

4.8

(13 reviews)

Multiwall polycarbonate sheet fixing buttons are 45mm in diameter with a shaft the same length as the sheet thickness (16mm shaft for 16mm sheets) this prevents over tightening and crushing of the sheet. Fixing buttons should only be used in the centre of

4.6

(12 reviews)

<H2>10mm Polycarbonate Use:</h2> <p>10mm polycarbonate sheets are available in Clear, Bronze or White / Opal . The 10mm polycarbonate sheet is used primarily as a roofing sheet, although they are often used in the construction of point-

4.8

(12 reviews)

<H2>10mm Polycarbonate Use:</h2> <p>10mm polycarbonate sheets are available in Clear, Bronze or White / Opal . The 10mm polycarbonate sheet is used primarily as a roofing sheet, although they are often used in the construction of point-

4.8

(12 reviews)

Gutter round running outlets are designed to allow lengths of gutter to be attacked to both sides and for a down pipe to be attached allowing the water to be diverted down to ground level.

5.0

(12 reviews)

The Frame Supported Hawk Glazing Barr is a visually unobtrusive and easy to install simple, yet strong, frame supported bar. It consists of a slim 48mm wide, aluminium base section and low-profile PVC top cap that work in unison with roofing sheets varyin

5.0

(11 reviews)

Square gutter support brackets, also referred to as gutter clips or fascia brackets, are screwed to the fascia and then clipped onto the gutter to hold it in the air.

4.6

(11 reviews)

Glen/Avon End Cap BROWN

C&A Building Products Reviews

About C&A Building Products:

Phone:

Email:

Location: