The service and delivery is fine. Quick and largely free. The blades are not really that good though. In terms of value it seems churlish to complain. They are cheap but they really should be better than they are. If I buy a 250mm 100 tooth triple chip blade then it follows I want it to do a reasonable good quality job. If the blade has sideways run out it’s a bit of an issue. The kerf is wider and exact where it is going to be a bit of gamble. If the blade bore is also eccentric to the rim you get even more inaccuracy and bad vibration in the mitre saw. I don’t think either fault is acceptable even if cheap. I would rather Saxton got the quality right and charged appropriately.