Thank you for sending the notice board so quickly. I had no difficulty installing it in position. However when I locked the door there was still about 5mm of movement in the door and it was clearly not tight against the seal. I could not figure what the problem and after some trial and error with different ideas I realised the rotating catches were installed the wrong way round. After I had reversed the rotating catches it worked perfectly, the locks pulling the door closed against the seals. Clearly your manufacture was at fault and your quality checking needs some revision. Overall I am very pleased with the notice board. It fits onto the existing notice board (which is in a conservation area) very unobtrusively. Just what the church needed.