The wardrobe was delivered to schedule (we didn't opt for the assembly service as we needed to decorate the bedroom first). It arrived in 4 boxes (which the delivery team placed in the garage for me) two of which contained the mirror doors. These were opened in my presence and checked for damage. Despite the parts not being labelled (for some reason they seldom are these days) the assembly instructions were sufficiently clear (after a bit of thought) to avoid mistakes. I also received a YouTube link in an email showing the product (or one very like it) being assembled. The only problems were a follows: 1. The bar that fits on the cams at the top of the wardrobe was too long! I had to saw a bit off. The bar is located behind uprights which glue in place on either side so the cut end isn't visible. 2. The diagram showed the top rail clips on the doors being pushed upwards to engage the top rail and then secured in place by tightening a screw. That's fine for the inner door and the right hand clip on the outer door but the inner door prevents access to the left hand clip on the outer door! It was possible to push it up but it was impossible to tighten the screw as there is just a 1cm (if that) gap between the inner and outer doors where they overlap. The clip just fall down. I fixed the problem by pushing the clip up into place and securing it with a bit of blue tack pushed into place on the end of a screw driver. Now that the wardrobe is assembled, it is certainly a sturdy and good looking piece of furniture.