Bike Shed Model EBS-2308 The name ‘easyshed’ is a misnomer and assembling the shed is about as far from easy as you can get. This has been the most difficult and frustrating item I have ever assembled and it is physically demanding. Criticisms Prior to purchase there is no information informing you that all parts are not pre-drilled, you will have to drill all the holes yourself. Parts include 197 screws and 59 pop rivets, which will require you drilling holes through several layers of metal. Physically demanding! If you don’t have a pop rivet gun you will have to buy one. Tools listed as required included a step ladder, I don’t know why, and failed to list 4-5mm spacers and duct tape. Also essential and not listed is an impact driver for inserting the screws, or another power drill with a torque control, otherwise you will have blisters using a hand screwdriver. The instructions listed all parts and part numbers, which should have been printed onto each part. Some parts had the number printed clearly, some had an unintelligible number and some had no number. Front, back, sides and roof panel dimensions should match the corresponding U channels dimensions. They didn’t always resulting in struggling to get parts matched up prior to screwing together. When fitting the internal door slide bolt the overhang dimension is wrong and then fitting the hasp is physically impossible till later in the assembly. When assembled the doors sag and there is no way this can be prevented, so the door slide bolt and hasp previously fitted do not line up. Positioning the roof hinges to the back top rail in the positions indicated in the diagram is not possible as these areas have protruding screw heads. Assembly time took me into a 3rd day. I cannot recommend anyone buying this product and if I could give it a zero rating I would.