Unfortunately, not a perfect fit. The upper middle part is not sitting flush. Also the sides (where you have put the screws) it's not siting flush. On one side I managed to fit it just at the same level with the bumper, but on the right side not. In the installation process and also trying to fit it in the best position I managed to scratch the mesh around the screw hole and removed 1-2 mm of paint. It looks like in order to have a perfect fit the hooks have to be bended from factory at a specific angle, to hold onto the upper part flush. Also as an improvement: the mesh on the upper part of the grill should be 'finished' until it reaches the same depth as the grill frame. Probably like this the sides can be aligned better. Can I say that I recommend the Zunsport grille? Tough question. Not for me, but it also depends 'how perfect' you want it to fit and to look.