Nearly got divorced putting this bed (the Gent) together. If you are no good at flat pack, avoid this bed. Firstly the video for assembly was not for this bed. There were a lot more bits and none were labelled. To make matters worse, the instructions were not clear at all. I had to measure each bit of wood and then work out the number from the chart. Some of the pieces were a couple of mm out, making it even more confusing. The bed its self is quite robust and I am happy with it but the instructions let it down. Tips for assembly: start with the headboard and attach all the bits, remember to put in the big dowls for attaching the side panels and the feet (big drawing pins) before continuing. Do not put the top outside, wooden, decorative planks, on the other three panels as you will not be able to join the bed together. Remember the feet (big drawing pins) for the legs and footboard and the big dowls to joining the footboard to the sides. Make sure that the central support for the mattress slats is up the right way before attaching the two support legs as they are really difficult to get out once in, finally, good luck. To the company, Please do an assembly video for this bed as it would make life so much easier..