Good service from Go Banana arrived on time . The T-MECH 6.5HP WOOD CHIPPER is a good piece of kit, having now used it for about four hours. Here is the detail: Engine: It is powered by a chinese copy of the old Honda GX engine series almost down to the last detail. If the components are up to scratch this should last. It starts well and no oil leaks. Ensure you use the Honda specified oil as per the instructions. Construction: Lives up to chinese reputation. Good inflatable tyres and roller bearings on wheels make for easy transportation. Assembly from assembled parts is easy. Only one nut and bolt short in the pack. The top hopper isn't an exact fit for the body of the machine, however this is overcome by a thick rubber gasket already integrated. The side feed required required grinding out as there was a ridge on the feed and enlarging the entrance on on the side of the body as there was a ridge on the bottom of the body side that snagged incoming branches. i.e. not a good fit between the two components. The rubber flange at the top of the side hopper came apart in the first five minutes and broke off. The cutting blades look good quality and are sharp. Operation: The side hopper works and chips well, though be careful if entering 7cm branches as there is little flywheel inertia and you can stall the engine quite easy once the revs drop. The top hopper is for only 1cm max - any more and you will stall the engine. The top hopper is a shredder not shipper. Be careful if chipping too much laurel or evergreen branches as this can turn the greenery into a mush inside the machine and gum it up. Tip- if this happens use a leaf blower to purge the system from the top hopper. This is really a two person operation as the outlet shoot is only about 5cms from the ground and requires constant clearing to ensure the clippings don't back up in the outlet vent. If they do then and back up further than outflow grill its strip down time or use a leaf blower. Overall a good piece of kit and nice that user protection kit is added - in operation it is very noisy as you would expect would expect